vega mt10

Fleet management solutions of the future today

Monitoring of transport has never been so easy!

Vega МТ X CAN

Novelty on the market of monitoring transport among GLONASS/GPS terminals from the Vega-Absolute company.

Why exactly MT X CAN ?!

This innovative device designed specifically for you and manufactured in Russia

It works with three CAN buses

MT X supports three CAN bus operation simultaneously

Car managment by smart commands

Create and send the commands you need to the CAN bus

Built-in CAN bus scanner

MT X does not require third-party devices to scan CAN bus

Pre-installed SIM chip or two SIM card slots depend on order

Easy and simple, you can choose a cellular operator and tariff

GLONASS / GPS

Choose which GLONASS / GPS antennas you need - embedded or external

Product lineup Product lineup

Product lineup

MT X int


Antennas GNSS and GSM

  • Embedded

Interfaces

  • Interface CAN x 3
  • RS-485 x1
  • RS-232 x1
  • Lin/K-Line x1
  • UART 3,3v x1
  • USB x1
  • Multifunctional inputs x3
  • Digital outputs x4
  • 1-Wire x1
  • Tamper sensors x2

GSM

  • Quectel MC60
  • 2 SIM cards or 1 SIM chip and 1 SIM card
  • 4-band (850/900/1800/1900 MHz) GPRS class 12 85.6kbps Up / Down

GNSS

  • Quectel MC60
  • GLONASS/GPS/Galileo/QZSS
  • Sensitivity: -167 dBm (tracking)
  • Hot start: 1 s / Cold start: 35 s
  • Warm start: 4.5 s
  • Channels: acquisition 99, discovery: 33
  • Positioning accuracy: 2.5 m

MT X Ext


Antennas GNSS and GSM

  • Embedded

Interfaces

  • Interface CAN x 3
  • RS-485 x1
  • RS-232 x1
  • Lin/K-Line x1
  • UART 3,3v x1
  • USB x1
  • Multifunctional inputs x3
  • Digital outputs x4
  • 1-Wire x1
  • Tamper sensors x2

GSM

  • Quectel MC60
  • 2 SIM cards or 1 SIM chip and 1 SIM card
  • 4-band (850/900/1800/1900 MHz) GPRS class 12 85.6kbps Up / Down

GNSS

  • Quectel MC60
  • GLONASS/GPS/Galileo/QZSS
  • Sensitivity: -167 dBm (tracking)
  • Hot start: 1 s / Cold start: 35 s
  • Warm start: 4.5 s
  • Channels: acquisition 99, discovery: 33
  • Positioning accuracy: 2.5 m

MT X LTE


Antennas GNSS and GSM

  • External

Interfaces

  • Interface CAN x 3
  • RS-485 x1
  • RS-232 x1
  • Lin/K-Line x1
  • UART 3,3v x1
  • USB x1
  • Multifunctional inputs x3
  • Digital outputs x4
  • 1-Wire x1
  • Tamper sensors x2

GSM

  • Quectel EC21E
  • 2 SIM cards or 1 SIM chip and 1 SIM card
  • LTE Cat 1 / 10Mbps down / 5Mbps uplink

GNSS

  • U-blox EVA-M8M
  • GLONASS/GPS/Galileo/QZSS/BeiDou
  • Sensitivity: -164 dBm (tracking)
  • Hot start: 1 s / Cold start: 26 s
  • Warm start 3 s
  • Channels acquisition 72
  • Positioning accuracy: 2.5 m
More Detail More Detail

Features

Basic

  • Case dimensions: 110 х 67 х 20 mm
  • Ingress protection rating: IP53
  • Supply voltage: 9...36 V
  • Operating temperatures: -40...+85 °С
  • Built-in battery: 560 mAh

Communication

  • Wialon IPS, Wialon Combine, EGTS, NDTP, VEGA protocols are supported
  • Simultaneous data transfer to 4 servers
  • Flexible data transfer parameters: by change / with track point / by time
  • Filtering and Power Saving Modes
  • The choice of used navigation system
  • 50 geofences in the device memory
  • 25 user scenarios
  • 160 NRF beacons in device memory
  • Support iQFreeze
  • 8 Mb memory - approximately 100,000 entries
  • SMS commands for configuration and management

Software

  • Remote diagnostics
  • Remote configuration
  • Multy settings updating

Opportunities CAN

  • Simultaneous decoding of data received from 3 physical CAN buses
  • Saving sensors configuration to a file
  • CAN scanner - definition of information for creating sensors
  • CAN tracer - recording and playback of data stream
  • CAN scripts - sending commands to the CAN bus

Assignment of inputs

  • Analog - voltage measurement
  • Digital - input signal level (0 or 1)
  • Frequency - measuring the frequency of the input signal (max 2500 Hz)
  • Pulse - counting the number of pulses
  • Ignition control input

Assignment of outputs

  • Digital - for connecting actuators (load on each output no more than 0.5 A)
  • Frequency - can be assigned to any of their digital outputs
More Detail More Detail

Downloads

Manual

Download

Configurator

Download

Firmware

Download
About company

About company

The company "Vega Absolute" is a company with a full production cycle from the idea to the final product.

  • Vega-Absolute Office The office occupies two adjacent buildings and includes production facilities. office space and warehouses. It takes place almost the entire production cycle from the idea to the shipment of finished products.
  • PCB layout PCB layout is done highly qualified specialists. Workplaces are equipped with everything necessary.
  • Chassis Production Design is first developed housing suitable for specific equipment and convenient to use.
  • Chassis Production The CNC milling machine allows make molds of complex shapes.
  • Production of the hull Experts manually complete the manufacture of a press forms if necessary.
  • Case Production Case molding is carried out on modern equipment.
  • Software Development Our company pays great attention to the software part of the product, because it is a guarantee of its uninterrupted work.
  • Installing SMD Components Surface SMD components are mounted on two modern automatic lines operating simultaneously.
  • Installing SMD Components Qualified employees control the production process, prepare and maintain the line.
  • Installing SMD Components Automatic Installing SMD components YSA20 from YAMAHA can install up to 90,000 components per hour.
  • Cutting group blanks Electric cutter quickly and qualitatively separate the group blanks of printed circuit boards for further work.
  • Production of harnesses Our company produces harnesses all your own needs.
  • Production of harnesses Gamma 255 automatic line allows cut the wires and crimp them according to the program laid down by the operator.
  • Production of harnesses Automatic line contains a control module quality of the contacts produced.
  • Production of harnesses Each connector is assembled and checked manually.
  • Installing the output components In our company It employs more than ten qualified installers of electronic equipment.
  • Installing the output components Workstations are equipped everything you need.
  • Quality Control All products are subject to mandatory and rigorous testing by experienced staff.
  • Packaging of finished products Devices are packed in individual packaging according to the scope of delivery.
  • Packaging of finished products Individual approach to every client is guaranteed.
wowslideshow by WOWSlider.com v8.7
Our contacts Our contacts

Our contacts

Our contacts

E-mail: hello@mt10.ru
Phone: 8-800-550-41-35
Fax: +7 (383) 206 4129

Address

Russian Federation
Novosibirsk
Kirova 113/1
Vega Absolute
To contact us

To contact us

Please enter a name
Please enter a valid message.
Please confirm your acceptance of the Terms for the processing of personal data
-